Procurar Selos Da Bomba Da Arruela Da Pressão, Vedações De água De Pistão, V Arruela De Pressão Tipo V no diretório Industry Directory, fabricante / fornecedor / Fábrica confiável a partir de China

Cesta de Consulta (0)
Página inicial > Lista de Produto > Selos da bomba da arruela da pressão > Kit de Vedação de Arruela de Pressão Tipo V

Kit de Vedação de Arruela de Pressão Tipo V

Informação básica

Modelo:  18*26;18*28;24*32;16*26;25*35;28*38 and custom

Descrição do produto

N ° de Modelo: 18 * 26; 18 * 28; 24 * 32; 16 * 26; 25 * 35; 28 * 38 e Tipo de Operação: Tipo de Bico Fixo: Bico de Coluna de Água Redonda Condição: Novo Tipo de Selo: V ou U Color : Preto, marrom, branco Temperatura: até 80 Velocidade linear: Abaixo de 2m / s Transporte: Carton Origem: China Tipo: Hot Water Alta Pressão Cleaner Drive: Motor Aplicação: Industrial Customized: Customized Material: NBR / FKM + Aramid / Fabric PTFE / POM Mídia: Mineraloils.Emulsion Water um óleo Pressão de operação: abaixo de 250bar Marca: kdr Especificação: 20 * 20 Código HS: 4010120000 Nossa empresa \ nTemos uma reputação comprovada de fornecer soluções técnicas de vedação de qualidade para qualquer problema de vedação. Empregamos pessoal técnico altamente experiente e qualificado. \ NNós garantimos que a satisfação do cliente é uma prioridade máxima em todos os níveis da nossa empresa. Fornecemos uma ampla gama de vedações hidráulicas padrão ou não padronizadas em materiais, perfis e tamanhos para atender a uma ampla variedade de aplicações. \ NA qualidade faz a diferença. \ NA Lacra Saixuan faz a diferença. \ N \ nInformações do selo de lavagem de alta pressão \ nSujeita a água refere-se a ter uma certa altura da coluna de água no dispositivo, para evitar que o gás de drenagem para o interior do sistema.Na construção de tubo de drenagem, selo de água está localizado em drenagem de sanitários, usado para resistir a diferença diferença drenagem tubo de drenagem, drenagem sistema de tubulação para evitar o gás no interior de uma certa altura na coluna de água, muitas vezes implementado com uma armadilha. \ nThe V-ring é produzido por borracha, tem muito boa elasticidade.Ele pode ser facilmente alongado.Ele pode ser instalado facilmente e rotativo junto com o eixo. \ nVA Style - Devido à sua seção transversal intermediária e ampla faixa de diâmetros, o estilo VA é o mais popular design de vedação em V \ n \ nDureza: 60-90Escala \ nTemperatura: -20 ° c-220 ° c \ nVelocidade: 30 m / s \ npressão: ≤40Mpa \ n \ nAlta / baixa resistência à temperatura, resistência a óleo e combustível, \ nexistência de resistência, \ nO resistência à zona \ n1.Grande impermeabilidade e amortecimento \ n2. Resistência à água. \ N3.Anti-envelhecimento \ n4.Anti-ozono. \ n5.Ólido-resistente \ n6. Resistente à pressão. \ n7.Resistência a altas e baixas temperaturas. \ n \ nboa elasticidade, forte carga adaptativa contra a vibração axial e radial, suportar a alta temperatura e a variação pressão, fácil de ser instalado ou carregado \ n
Some of the related fabric reinforced rubber seal
Step Seal
 
        Step seal is usually made from synthetic rubber qualitative protection ring and filled ptfe qualitative special shape of rectangular, trapezoidal seal ring, like to circle can be divided into the hole with the step seal and with the stern shaft sealing, the sealing effect and the sealing mechanism and to circle, but it only has a one-way seal effect.
 
Conventional materials: PTFE/ NBR/ PU;
 
Temperature: -30/+100 degrees Celsius;
 
Speed: Less than 5m/s;
 
Pressure: Less than 40Mpa
SPGO
        SPGO is usually made from synthetic rubber qualitative protection ring and superposition of filled ptfe qualitative square seals use, it can be divided into the hole and shaft used to use to circle, but its sealing function is the same, in accordance with its own initial deformation on the sealing surface of high contact stress, prevent leakage of pressure of the liquid. Hydraulic cylinder, pressure of liquid by elastic ring in the maximum extrusion rectangular sealing ring, make it close to the sealing surfaces, resulting in increased with the pressure of the liquid pressure of higher and higher additional contact stress, contact stress and the initial together to prevent leakage of liquid pressure.
Conventional materials: PTFE/ NBR/ PU;
Temperature: -30/+100 degrees Celsius;
Speed: Less than 5m/s;
Pressure: Less than 40Mpa
Piston seal
 
        Piston seal used for reciprocating motion of hydraulic cylinder.
 
Conventional materials: TPU / CPU/ Rubber;
 
Temperature:
 
TPU: -40/+80 degrees Celsius;
GPU: -40/+120 degrees Celsius;
 
Speed: Less than 0.5m/s;
 
Pressure: Less than 32Mpa;
 
Rod seal
 
        Rod seal used for reciprocating motion of hydraulic cylinder.
 
Conventional materials: TPU / CPU/ Rubber;
 
Temperature:
 
TPU: -40/+80 degrees Celsius;
GPU: -40/+120 degrees Celsius;
 
Speed: Less than 0.5m/s;
 
Pressure: Less than 32Mpa;
Stainless steel lip oil seal
 
        Stainless steel lip oil seal is made of stainless steel plate, the shell can be rubber or plastic bags, lip with modified PTFE, wall engraved with the spiral groove, it has wide contact with shaft surface, a thrust inward happens when axis rotation, stop the outflow of fluid and achieve effective seal. Skeleton oil seal seal selection of materials for the filled PTFE modified (main filling ingredients for: glass fiber, carbon fiber, graphite, molybdenum disulfide) greatly improve the wear ability of PTFE. Temperature range -70 °C to 250 °C, pressure of 3 mpa, suitable for all kinds of brands, various types of screw, sliding vane compressor is used.
Conventional materials: PTFE+SS
Wiper
 
        Wiper used for reciprocating motion cylinder, cylinder piston rod sealing and dustproof.
 
Conventional materials: TPU / CPU/ FKM/ NBR
 
Temperature:
 
TPU: -40/+80 degrees Celsius;
GPU: -40/+120 degrees Celsius;
NBR: -30/+120 degrees Celsius;
FKM: -20/+200 degrees Celsius;
 
Speed: Less than 0.5m/s;
 
V-packing
 
v-packing are axial seals with an elastomer sealing element vulcanised in the mould. The typical design of a v-packing is comprised of the body, the flexible joint and the sealing lip. It is consist of three parts, which are seal ring, support ring and pressing ring. It is the seal used for piston rod of tank.
Conventional materials: NBR, NBR Fabric, Viton, Viton fabric, PTFE, PTFE filled carbon/bronze, PU, PA, copper
Temperature:
NBR: -30°C /120°C; FKM -20°C /200°C;
PTFE: -55  °C  /260 °C
Speed: Less than 5m/s;
Pressure: Less than 60Mpa
TC oil seal
 
Application:
 
1. Fluid system (static&dynamic)
2. Hydraulic system (dynamic)
3. Pneumatic system (dynamic)
4. Oil or grease media sealing 
5. Water media sealing
6. automobile, motorcycle, industry, 
agricultural machinery,truck, buses, trailers,
exercise equipment.
 
Conventional materials: NBR/ FKM
\ nContato \ n \ n Bem-vindo ao nosso site para obter informações sobre produtos de poliuretano de qualidade. \ nPor favor, não hesite em nos contatar diretamente, caso não consiga obter as informações corretas na página de detalhes deste produto. \ n \ n \ nLinkin: http://www.linkedin.com/in/seven-chia-002255122/
Facebook:https://www.facebook.com/seven.chia.98

Grupo de Produto : Selos da bomba da arruela da pressão